Specifications

71861 XMC Signal Processing

Refer to Model 71861 Specifications.

Carrier XMC Interface

Primary XMC Connector, J15:

Compliance: ANSI/VITA 42.3 XMC PCI Express Standard

P15 Connectivity: One PCIe x8 link direct to the PCIe bus

XMC pins MSDA & MSCL connected to PCA9535

for control inputs to FireFly connectors

Speed: PCIe link supports Gen3 data rates

Secondary XMC Connector, J16: (Option 105)

Compliance: ANSI/VITA 42.0 XMC Standard

P16 Connectivity: Two x4 gigabit serial I/O links routed as follows:

Eight serial receive lines wired from J16 to FireFly serial connector J24 (SER RX)

Eight serial transmit lines wired from J16 to FireFly serial connector J25 (SER TX)

Speed: Each x4 link supports data rates up to 5 Gbps

Carrier PMC Interface (Option 104)

PMC Connector: 64−pin PMC standard connector, J14

J14 Connectivity: 48 I/O lines directly wired to GPIO connector
for 71861 user I/O

Nominal Power Consumption*

PCIe Carrier:

With no XMC: 6.35 Watts typ (9.31W max)

 

71861 XMC: +3.3V VPWR (12V or 5V) Total Power
XCKU035 (Standard) TBD TBD 32 Watts
XCKU060 (Option 084) TBD TBD 33 Watts
XCKU115 (Option 087) TBD TBD TBD

*With factory IP at the maximum clock rate.

Physical

Dimensions, PCIe Carrier, half−length PCIe add−in card

Height: 111.15 mm (4.376 in) (including PCIe connectors)

Length: 167.65 mm (6.60 in)

Weight

PCIe Carrier: 110 grams (3.9 oz)

XMC Module: Approximately 14 oz (400 grams), with 2−slot heat sink