The Threshold Detector IP Core generates a detection signal when the magnitude (see Power Meter) is greater than a programmable threshold, and clears that signal when the magnitude value falls below a programmable hysteresis value (threshold − hysteresis below threshold). This detection signal can be used as a gate in the DSP output (see DSP Gate Substitution).
Click on AXI4-Stream Threshold Detector IP Core - DDC Threshold Detector for Channels 0, 1, 2, and 3 to access register information.
Refer to the Pentek Navigator AXI4−Stream Threshold Detector IP Core Manual for a description of this IP module.