#
# h3255  freq hopping using freq list
# this tried to do 1 rcp , terminal input , then xmode then stop
#  it leaves turning the outputs off
# 2 freq
# sigen1 does 2 freq's
# siggen 2 does arb sending to sigen 1's external mod inpt
#           hhmmss
#set waitfor 161600
#set waitfor 172900
# retstart only had 0,6,7,8,9
#set waitfor 173500
set waitfor 135300
set outampSin "-4dbm"
#  sine
set sgSin    1
set sgArb    2
set chnArb   1
set srate   1000
#set freq1  "5.095e6"
set freq1  "8.175e6"
log -->start h3255 omode,xmode switching
#
arb $sgArb $chnArb clr

#config $sgSin h3255/2freqlist5mhz.cfg freq1=$freq1,outamp=$outampSin
config $sgSin h3255/2freqlist8mhz.cfg freq1=$freq1,outamp=$outampSin
# the arb waveforms
# for names, units are .001 sec
#                 xxxxxxxxxxxx
arb $sgArb $chnArb load arbstart      L100
arb $sgArb $chnArb load h10sl10s      H10000 L10000
#
send 2 SOURCE1:FUNC ARB
#
arb $sgArb $chnArb seq h3255/prog4.seq
config $sgArb arb1_only.cfg srate=$srate,seqnm=herblist3
#
# sequence
#--------------------------
startsg $sgSin 1 sine  -1
syncsec .8
#waitfor $waitfor .9
startsg $sgArb $chnArb seq:herblist3  420
waitsg .8
off $sgSin 1
off $sgSin 2
off $sgArb 1
send $sgArb INIT:CONT:ALL OFF
terminp "switch to xmode.."
#
startsg $sgSin 1 sine  -1
syncsec .9
startsg $sgArb $chnArb seq:herblist3  420
waitsg .8
off $sgSin 1
off $sgSin 2
off $sgArb 1