#  chirp cw.. chirp 2 secs cw 2 secs 5ms sweep time
# siggen 1 chan 1 sweep
# siggen 2 chan 1 burst 
# chirp chop for paul. using siggen 1 output with siggen 2 arb from chan 1
# to set:
# freq1,2  to sweep between
# swptime:
# need to setup the arb waveform .. h5msl5ms  .. and chirpchop.seq to match swptime + off time:
# eg  swptime 5ms
#     h1msl4ms
# sg2 triggered by 1 sec tick
set srate 1000
set freq1 "5.095e6"
set freq2 "5.125e6"
set swptime ".005"
set burstfrq 399.1
set bcnt "399"
set pulsew ".001"
set pulsep ".005"
set outampSin "4.3dbm"
set sgSin    1
set chanSin    1
set sgBurst  2
set chanBurst  1
set sgArb  3
set chanArb  1
log -->start chirpArb
arb $sgArb $chnArb clr

config $sgBurst burst1.cfg pulsew=$pulsew,freq=$burstfrq,bcnt=$bcnt
config $sgSin chirpcw.cfg freq1=$freq1,freq2=$freq2,outamp=$outampSin,swptime=$swptime
#                 xxxxxxxxxxxx
arb $sgArb $chnArb load arbstart      L40
arb $sgArb $chnArb load h1m           H60000
arb $sgArb $chnArb load l1m           L60000
#
send $sgArb SOURCE1:FUNC ARB
#
arb $sgArb $chnArb seq h3252/prog1.seq
send $sgArb SOURCE1:FUNC:ARB natasha1
config $sgArb arb1_only.cfg srate=$srate,seqnm=natasha1

startsg $sgSin 1 sine  -1
syncsec .9
startsg $sgBurst $chanBurst  burst 1000
startsg $sgArb   $chnArb     seq:natasha1 3600