Battery Installation

Your Model 71861 shipment includes a battery in a separate package, identified as part number 174.50010. If you plan to use the Kintex FPGA bitstream encryption capability, such as with Pentek’s Navigator FDK, the battery must be installed on the solder side of the main PCB (part number 320−71801 or 320−71802) as shown in the drawing below (click on it to enlarge it). Ensure that the battery positive terminal is facing the outside of the battery holder.

Perform all assembly steps at an antistatic workstation.

Model 52861 (Model 71861 on a Pentek Model 5201 3U VPX carrier) and Model 53861(Model 71861 on a Pentek Model 5306 3U VPX carrier) are shipped with the battery already installed because the battery cannot be installed without removing the Model 71861 XMC from the VPX carrier.