Inspection

After unpacking, inspect the unit carefully for possible damage to connectors or components. If any damage is discovered, contact Pentek immediately at (201) 818−5900. Please save the shipping container and packing material in case reshipment is required.

The simplified assembly drawing of Model 71861 (below) shows the complete PCB assembly as shipped, including the front panel I/O module and the connectors for Options 104 and 105. Depending on the FPGA option ordered, there are two different main PCBs, part number 320−71801 or 320−71802 as identified below, to accommodate different Kintex FPGA physical profiles.

Model 71861 PCB Assembly Drawing, Connector Side

Note that a heat sink can be mounted on the Model 71861 PCB assembly as shipped.

Minimum System Requirements: The system in which you install this Pentek product should have the latest Intel® Core™ i7 processor with a minimum RAM of 8 GB. PCIe Gen 3 x8 is required. Model 71861 is shipped to boot with Gen 3 x8 PCIe default FPGA code. For more information, refer to DIP Switch Settings.